4mm Bowden tube release and guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes releasing the PTFE tube easy and keeps the tube straight at the connector.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 257
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
4mm Bowden Tube Guide and Release.
Save your fingers and easily release the PTFE tube. Also keeps PTFE tube from bending too much near the connector, reducing drag. This may seem to be a trivial item, but it is effective.
I have large hands and pushing the release for the PTFE tubes was not without pain. Push down to release and easily pull out the PTFE tube.
Insallation, Slide it over the PTFE tube before inserting into the connector.
This also prevents the tube from bending sharply when next to the connector. This helps reduce drag. Every little bit helps.
There are 3 versions, 10mm recess long and short and a 12mm recess. The 10mm long or short will work on all 4mm PTFE tube connectors. The 12mm recess is to help stop bending of the tube when there is more pressure to bend exiting the connector.
The short version of the 10mm recess for use with an MMU The PTFE tube from the MMU needs all the flexibility. To accomidate this I made a short version for the MMU and Nextruder.
Material, PLA, PETG or your choice. It can be printed with the top down and no supports are needed. Brim is optional, depending on how well your printer bed sticks.