1 / 9
K1TDG LAB599 TX-500 Battery - 5000mAh or 3000mAh — zdjęcie 1
1 / 9

K1TDG LAB599 TX-500 Battery - 5000mAh or 3000mAh

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This set of models will build a 5000mAh or 3000mAh battery pack for the TX-500 HF Radio from LAB599

Ocena
5 / 5
Polubienia
22
Pobrania
236
Wydruki
2
Wyświetlenia
1691
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE 2: I am selling the 5000mAh version with USB-C charging, and Callsign customization in my ETSY shop:

https://k1tdgtech.etsy.com

UPDATE1 : I just uploaded a new version of the 5000mAh case that will allow the radio to stand at a good angle for viewing the screen.

This project will allow you to build a battery for the LAB599 TX-500 radio. 

The batteries used are LIPO batteries from Amazon.

NOTE: THIS PROJECT DOES NOT USE 18650 CELLS!

The 5,000mAh battery is commonly used in RC cars and planes.

The 3,000mAh batteries are commonly used for electronic projects.

The POGO Pin choices are to use the POGP Pin adaptor, and purchase just the pins and insert them into the adaptor, OR purchase the actual 3 pin magnetic POGO pin connector that will fit.

Both back are provided, one for the hand made (by you) POGO Pin adaptor, and the other will take the prefab POGO pin assembly.

BOM..:

Common..:

7 x 3mm heat set thread inserts
6 x 3mm x 10mm countersunk screws
7 x 3mm x 12mm countersunk screw
1 x mini press button latching switch
https://www.amazon.com/dp/B07XT6K5B8

1 x Battery charge meter - 2S-8S DC5-30V 12V/24V Lithium Battery Charge LED
https://www.amazon.com/dp/B0BWMT2KBZ

1 x BMS 3S 12V 10A Lithium Battery Protection / Charger
https://www.amazon.com/dp/B07J9NXQ6W

1 x GX12 2 Pins Panel Metal Mount Circular Metal Aviation Connector
https://www.amazon.com/dp/B089YT6LFN

 

5,000mAh..:

1 x 3S 5000mAh Lipo Battery 11.1V 50C
https://www.amazon.com/dp/B06XNTHQRZ

3,000mAh..:

3 x 3.7V 3000mAh Li-Polymer Battery
https://www.amazon.com/dp/B0B3MPX6RX

 

POGO Pins or POGO Adaptor?

Either get the raw pins..:

Gold Plated Spring Loaded Thimble Pogo Pins Probes 2mm Dia 7.5mm Height
https://www.amazon.com/dp/B0BJPMWW5J

 

Or the 3 pin POGO adaptor…:

Spring Loaded Magnetic Pogo Pin Connector 3 Positions Magnets Pitch 2.3 MM
https://www.amazon.com/dp/B0BN3HS7JF

 

Finally you will need 4 x 4mm Hex Bolts to screw the case to the back of the radio. The 3,000mAh case will need 20mm bolts and the 5,000mAh case will need 25mm bolts.

 
I WILL BE ADDING THE WIRING DIAGRAM AND INSTRUCTIONS SOON.

NOTE: these are NOT affiliate links.

Tagi