1 / 5
Prusa XL series: Dual Extruder low Temp for Prusa XL (update: g-code works) — zdjęcie 1
1 / 5

Prusa XL series: Dual Extruder low Temp for Prusa XL (update: g-code works)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Since the Prusa xl requiered special Temp treatment, i designed a 2 Color Temp Tower with 1 Degree Temperature steps.

Ocena
0 / 5
Polubienia
14
Pobrania
84
Wydruki
0
Wyświetlenia
916
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Since the Prusa xl requiered special Temp treatment, i designed a 2 Color Temp Tower with 1 Degree Temperature steps.
This temp Tower is specifically made for the PRUSA XL . This part will fail  on a “bedslinger”

The Base is 2mm Tall. Then every Temp Tower on itself is standard 10mm high.
It needs to be sliced in 0.20 height with 0.6mm nozzle 
or 0.10 and 0.20 with 0.04mm nozzle. But still each color change will only be made every 0,2mm

I uploaded a working G-code for Tool 1 and Tool 2. It is for Input Shaping Alpha and was sliced with Prusaslicer 2.7.0-beta1

---------------------------------------------------------------------------------------------

 

Whats needed for the Temps to change every 10mm? 

Here is the code that you need to add at “Beforce layer change gcode”:

 

M109 S{205 - (1 * int((layer_z - 2.0) / 10))}

 

Below as an example(M104 is wrong in the Image):

After that i needed to replace the following with notepad++
M109 S210 T0  with → ;M109 S210 T0

M109 S210 T1 with → ;M109 S210 T1

M104 T0 with → ;M104 T0

M104 T1 with → ;M104 T1

After this it worked for me. Im sure, prusa will solve this bug. Until then, we can help ourself with this.

---------------------------------------------------------------------------------------------

 

After many asked me how they could support me, you can now 

Tip me on KO-FI by klicking here:

                                                      https://ko-fi.com/surfalex2000

 

Check out my other optimized XL Parts! There is a Series to come!

You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114

Tagi