1 / 2
Lack V2 Enclosure Leg Drilling Jig for 1/8" drill bit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lack v2 enclosure leg drilling Jig for 1/8" drill bit
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Probably unnecessary, but I wanted something I could use other than the actual corner pieces (which were already assembled at the time). Hole sized at 1/8".
Generated GCODE is for .3 layer height and better supports, but I also included the STL.
I used this model (Lack Enclosure Extra Table Connector)
So thanks to TDub415 https://www.prusaprinters.org/social/24289-tdub415