1 / 3
Dog Waste Bag Holder with Auto-tearing Tab
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This dog waste bag holder has a tab which snags on the open hole in the roll and automatically tears off the bag.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 220
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
There are a ton of other dog waste bag roll dispensers on Printables, but I couldn't find one that had a tab on the exit of the tube that will automatically tear off the bag.
I had another bag dispenser like this, but it finally bit the dust, so here's my rendition of a replacement.
Parameters:
- 5% infill
- 2 perimeters
- 0.2 layer height
- PLA works fine
- No supports needed
Other info:
- Threads are a little sticky, but it's a good self-lock
- .3mf file has a 100% infill enforcement on the cap loop for carabiner or velcro strap
- Fusion360 files also included for remixing and the like