(INSIDE FRONT FEETS)SquashBall MK3s/MK3s+ Vibration Damper V3.0 (for toolbox version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for those like me who upgrade their Prusa and want to put squashballs while keeping the toolboxes on each side.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 129
- Wydruki
- 7
- Wyświetlenia
- 1899
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 ( https://www.prusaprinters.org/fr/prints/53765-side-drawers-for-prusa-mk3-i3 ) you will have a big problem : impossible to combine both !
The only solution is to put the front feets inside the frame.
This is my very very small contribution of those marvelous designs.
I WILL SAY EXACTLY LIKE Rui Carmo :
No supports needed!
force-clipping, and no need zip ties as this would disrupt the movement of the plate.
For assembly use a Tiny bit of the Lubricant Prusa provides between the ball holder and the clip (aka dovetail joint), makes insertion and removal easier!
OR
a few small strokes of the file to fit the 2 pieces together without forcing too much (My favorite solution)