Laptop stand extra leg and connector for 15,6"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra leg to support bigger laptops and wider connector
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 163
- Wydruki
- 2
- Wyświetlenia
- 1057
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I've printed finke stand but it appears it was to small for my 15,6" laptop so I designed an extra leg so the laptop is not tilting backwards.
The leg is pressed into the triangle hole of the leg. It is a nice tight connection but it is possible to disassemble it.
Besides this, I have designed a larger connector to support the laptop on the sides.
To fit this on the MINI you have to divide it into two pieces and glue them together. In my 3fm and gcode the shape is already cut with following parameters. Please keep in mind that the angle is set to 10 so it fits from only one side.
The connector is designed to accommodate the extra leg insert into the triangle hole:
I have used the following printing parameters:
- perimeters - 3
- solid top and bottom layers - 0
- infill - 12-15%
- infill pattern - honeycomb
- infill anchor - 100%