1 / 7
Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Neo - Bed Alignment Cover — zdjęcie 1
1 / 7

Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Neo - Bed Alignment Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-on bed alignment for Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Neo

Ocena
4,684 / 5
Polubienia
790
Pobrania
9507
Wydruki
72
Wyświetlenia
24 463
Oceny
57

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a clip-on cover for the cable connector that goes to the bed of the Kobra 2 Pro. It should also work on the original Kobra 2 and the Kobra 2 Neo. The cover is meant to act as a bed aligner. It is also easy to put on and remove as it "clicks" into place and stays there quite tightly.

In the 3mf file for Prusa Slicer I also manually added the supports including settings for their (relatively) easy removal. I tried to keep the actual fence of the cover as low as possible while still allowing for easy alignment. This way it shouldn't interfere with the ABL feature (hopefully).

Tagi