Roborock S8 Pro Ultra S-Bag tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement dust bag tower for Roborock S8 Pro Ultra dock.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 918
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
For easier use of S-bags on the Roborock S8 Pro Ultra base station. Adapter made previously worked just fine, untill bag got overly full and made a blockage through the adapter plate.
This version replaces original bag holder tower from the base station with one that accepts S-bags directly and no more issues removing the bag when it's full.
This is V1, still in testing.
No permanent modifications required to the base station. Accepts S-bags without modification.
- Print all 3 pieces.
- Use 2 M4x20 screws and nuts to attach lock to the tower.
- Remove old tower from the base station by unscrewing 3 screws.
- Install new tower using original screws.
- Install S-bag by sliding bottom in and press sides against the tower.
- Slide the lock in place.
Coffee?
https://ko-fi.com/jorihelin
(I take no responsibility if you break your base station or any other issues that could arise from using the model. Print and use with your own risk.)