Protective case for Shimano Steps E6000 display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protective case for an SC-E6000 display of a Shimano Steps e-bike motor. The case is shaped after the display.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
When the display is removed form the bike, a cover can be used to protect the electrical connections as well as avoid scratches on the surface, if put in a bag.
The lid is locked in place when closed by bumps on the bottom part.
There are 2 version of the lid; with and without the Shimano logo.
I designed this box so that an SC-E6000 display of an Shimano e-bike fits in perfectly. This display is used on the E-6000 series of Shimano bikes.
In order to get this pretty nice shimmering surface, I printed the case face down with a silky effect PLA. And I used the Hilbert Curve as bottom fill pattern. It reminds me of bike chains, so I found that fitting.
References:
I used the shimano logo from Michal Bastl: https://www.printables.com/model/424507-shimano-logo
If you want to print the case and the logo together on a single nozzle printer follow the instructuions of Lupis1: https://www.printables.com/model/140906-protective-case-for-bosch-intuvia-display