Ender 5 S1- electrical housing relocation clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleek solution to securely reposition your to the printer
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used the M4 bolts that already are used to mount the electrical housing to the bottom of the printer to secure the clamp to the housing then used four M4 T-nuts to mount it to the frame of the printer.
The way its mounted allows you to still open the housing for whatever reason you need to.
I'm not sure if it will work with the original creality enclosure and its only really works if you have a sonic pad or your not using the built in screen for klipper.
You also need to be careful around the switch to not accidently touch the live wire since its exposed with having the big gaps in the side.