Bike tail light adapter for Cat Eye B-1 rear reflector bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for rear reflector bracket for mounting a saddle-post taillight, if you have a toolbag already under the saddle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The Cat Eye B-1 rear reflector bracket attaches to the frame cross brace right behind the saddle post. It is considered a "vintage" part, and can easily be found on eBay. It is used to mount the Cat Eye RR-290 reflector, which is still sold by Cat Eye – although the bracket is no longer sold.
This adapter lets you mount a saddle-post taillight on the reflector bracket.
I made this because I wanted to mount a taillight on my old Nashbar road bike, but I have a tool bag occupying the position under the saddle, so I couldn't put a tail light there.
The adapter prints as a vertical cylinder but the slot that surrounds the bracket is angled at 73°, which is the typical angle of a bicycle saddle post. The adapter is screwed in place with the original self-tapping screw from the reflector.
Printing
The only critical setting is the number of perimeters. Use 4 perimeters to cover the bite of the self-tapping screw threads.
Assembly
- Slide the adapter onto the bracket, so that the slope of the adapter would be parallel to the saddle post.
- The screw is inserted from the forward-facing side of the adapter, opposite the rear side where the taillight would go.
- You need to exert a lot of pressure on the screwdriver to get the threads started.
- Don't over-tighten. The screw does not need to be tight, just snug. Its only purpose is to lock the adapter in place to prevent it from slipping off.
Category: Sport & Outdoors