Skadis Screwable Mounting Hook, OpenSCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic IKEA Skadis hook to screw on everything you want, Customizable with OpenSCAD
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Just a little helper. I needed to screw a basic hook for a box, which i wanted to mount to the Skadis board, but i did not find a screwable one, so i made it. The OpenSCAD - file is attached, so you are able to customize the hook if needed. The prebuild files are for screws M2, M2.5 and M3 with either a 6mm thread or fully threaded. If someone has already made a similar hook, which i could not find, please give me a hint, i do not want to violate any license.
Printing:
Layer height should be not greater then 0.12mm.
The thread has to be in the z-axis.
I use PETG or PLA, but any material should be fine.