Plow Controler Mount Removable with cell mount as well
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mounts to your controller NO HOLES DRILLED... also it is in 2 piece so the controller, cell mount too!!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
this will mount your fisher plow control box using double side tape, also it is in 2 parts so it can be removed when not in use… the joints are very tight and solid… test fit and sand if needed… i just used a de-burring tool… i printed in ABS at .20 with 50% fill… what i like is no holes drilled into the dash and it is removable.
there is a cell mount for when not in use or just if you want to mount your cell…
clear double sided alien tape works great, super strong and won't come off…. to remover mount you twist and will come off, holds as good as screws but no holes