Twisted Vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: Added another Inner vase with a 4mm base so that it does not get stuck in the outer if it's screwed in too far.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 325
- Wydruki
- 5
- Wyświetlenia
- 1217
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: Added another Inner vase with a 4mm base so that it does not get stuck in the outer if it's screwed in too far.
This was inspired by Devin @ Make Anything on YT.
Devin created something similar in Solidworks. But since I use Fusion 360 I wanted to design a similar thing in that. It was a bit of a challenge, but then, it wouldn't be any fun if it was easy :-)
And this is the result. Obviously I will tweak it from time to time, but at least this works very well.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: Interactive Art Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.2
Notes:
Designed with the Helix Plug-in available here https://forums.autodesk.com/t5/autodeskhelp/creating-a-helix-around-a-3d-curve-with-fusion-360-amp-python/ba-p/6604709 and the Sweep function
Printed in vase mode.