1 / 2
Nf-Crazy Volcano (Mellow version of volco-drag) - Silicone Sock - For RTV gasket maker — zdjęcie 1
1 / 2

Nf-Crazy Volcano (Mellow version of volco-drag) - Silicone Sock - For RTV gasket maker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

- A mold for a silicone hotend sock. - Designed for use with gasket maker

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
0
Wyświetlenia
311
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Based on https://www.printables.com/model/227155-nf-crazy-volcano-sock-mold from Karnadi, which I found didn't fit my hotend very well. I went ahead and designed something a little bit thinner, and with extra focus on gripping the top of the hotend. 

Excludes the original air gaps in order to make molding with RTV a little easier as it's more viscous than casting silicones. 

Required hardware: 
6 M3 nuts (Locking or non-locking)
4 M3x35 (as few as 2) bolts → Can be longer
2 M3x25 bolts → Can be longer

 

Tagi