1 / 3
Sony FX6 Rycote Lyre Mic Holder Adapter (Version 2)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an update of a Rycote Lyre adapter for the Sony FX6 but with a friction fit rather than a nut design…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (18)Powiązane
This is an update of a Rycote Lyre adapter for the Sony FX6 but with a friction fit rather than a nut design (https://www.thingiverse.com/thing:4784464). There were some issues with the first design, I found that:
- The nuts could come off with rough handling
- The clearance from the top of the nut to the bottom of the Lyre was not much and it could rib
This design is much more robust but can take a bit of "wiggling" to get the Lyre into or out of the holder... but is is very secure, has plenty of clearance, and is much easier to print.
Print and Assembly:
- Print in the orientation provided
- Any material is fine (even PLA which is what I used in the pics)
- If it is too tight then print at 101%, too lose print at 99%
- To mount on the FX6, unscrew the stock FX6 Mic Holder, and using the same screws attach the printed file.
- The Lyre can now be inserted by rotating them into position from the top. Wiggle it in till it stops moving.