Anycubic Kobra 1 light carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CNC Milled carriage. Drops weight on Y axis by 320g, can be used with MGN15 rail.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom CNC Milled carriage. Designed by myself. No, you can't print it or mill it out of carbon. Only aluminum.
Drops weight on Y axis by more than 330g (might vary a bit based on aluminum alloy), which allows to increase speed and acceleration with klipper.
Also features wide belt clamping and MGN15 mounting holes (didn't used it myself)
(Btw, my guide to klipper on kobra https://www.reddit.com/r/anycubic/comments/ynvbj0/anycubic_kobra_working_config/)
Carriage requires:
1) If you plan to use it with v-slot wheels, than you will need 7mm eccentrics, stock ones will not fit. (https://aliexpress.ru/item/1005001835525483.html?spm=a2g2w.orderdetail.0.0.1c094aa6h0B2gw&sku_id=12000017797012064 Type C)
2) Set of springs and knobs to adjust hotbed.