Inspiration Coin with Textured Castle Tower Storage and Rolling Slit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An inspiration coin for tabletop RPGs inspired by a four leaf clover, with a textured storage tower and rolling slit.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
An inspiration coin (or pf2e hero point!) for tabletop RPGs inspired by a four leaf clover, with a textured storage tower and rolling slit. The lid closes with a press fit, but there is also space for a 8mm diameter 3mm thick magnet for a nice snappy fit. The wood board on the top of the tower prints separately and can be put in with a little force and then stay put.
Everything prints supportless, except the lid, which I recommend printing with tree supports, but normal supports will work fine as well. The coin looks better with ironing enabled, but it is not needed.