Belt clip for thicker belts.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version is for 4mm (~0.16 inch) thick belts . Loose belt side is a bit longer and wider
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 378
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked vojtz design. Its low profile and you don't even feel its there.
This version is for 4mm (~0.16 inch) thick belts .
There are 2 versions on both of them the loose belt side is a bit longer
In the “Thicker” version the loose belt side clip is 2mm (~0.08 inch) thick giving it a bit more grip on the belt end.
In the “Thinner" version it is 1mm (~0.04 inch) thick .
I'm adding STP files for both versions so you can adjust it to your liking .
I printed with PETG but it tends to bend , PC or ASA are better choices for this.
0.15 layer high.
100% infil