1 / 2
Cat Portrait (HueForge)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A portrait of my cat Jacoby!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments used (PLA):
- Prusa Galaxy Black (TD: 0.6)
- Sunlu Orange (TD: 12+)
- Sunlu White (TD: 12+)
Color swap instructions:
- Start with Galaxy Black
- At layer #6 (0.56mm) swap to Orange
- At layer #13 (1.12mm) swap to White for the rest
