Roccat elo 7.1 Headband mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
UPDATE: I recommend using this remix if you have the hardware
https://www.printables.com/model/656946-roccat-elo-headphone-fix
Print with PLA 3 perimeters, 3 top and bottom layers, 15% infill and supports turned on. (tested on an ender 3 v2)
I recommend adding a modifier and printing the front part solid by increasing walls, otherwise it is prone to failure. But be careful when the part is solid, the 45° overhang is likely to warp up if your setting are suboptimal!
You will need two M4x10mm bolts and nuts in addition to the one that is in the original part. (M4x8mm can also work, but It's very close. If there is some material from supports left over, it won't work)