Single cable entry Sonoff Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 01/10/2018 As requested by BlueMaster27, I have added a main body with fixing lugs and the Sonoff insert…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 783
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 01/10/2018
As requested by BlueMaster27, I have added a main body with fixing lugs and the Sonoff insert included in one stl 'Main Single Entry with insert and fixings.stl' I have also raised the Sonoff up by 1.5mm to make the button protrude through the lid a little.
I just wanted this to have both power cables entering from one end, so that it could be fixed to the side on my Sigma.
I'd suggest using 17-18mm M3 screws for the cable clamp to ensure there is room for both cables.
Id appreciate you posting a make if you print this.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15%
Filament: 3D Printz UK PLA Blue