Chess pieces from SATURN 3 (1980) Movie, Supportless (FDM friendly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All chess pieces are supportless & have cutout for magnets at the base. About 15hour total print time at 0.20LayerHeight
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
This is my recreation of chess pieces from movie SATURN 3 (1980).
All chess pieces are supportless. All pieces have cutout for magnets (10mm width x 5mm height) at the base.
Chess pieces have 2x2cm base so they can be easily scaled and modified.
I sliced them in PRUSA SLICER and total print time was about 15 hours @ 0.20 layer height for PRUSA MINI+.
Maybe I'll add a printable chessboard but who knows…
Expected print time with Prusa MINI+ is about 15 hours with 0.2 Layer Height and stock slicer configuration.
If you have any suggestions, let me know. I can do similar models if you provide screenshots.
Be creative :)