Enclosure large 2kg spool holder - complete
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger version of the complete spool holder for your Original Prusa Enclosure. No other part needed.
- Ocena
- 4,429 / 5
- Polubienia
- 19
- Pobrania
- 246
- Wydruki
- 6
- Wyświetlenia
- 1092
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools.
To mount the spool holder - complete you will need the following fasteners*:
- M3x8 screw (2x)
* The package of the Original Prusa Enclosure includes extra fasteners, which were added in case you need a second spool holder :)
Print instructions
You have two options:
- use the pre-sliced G-code and print it on your MK4 (Input Shaping)
- download the latest PrusaSlicer and use the following settings**:
- print settings: 0.30mm DRAFT
- filament: PETG (tested on Prusament)
- 20% grid infill (added for extra support of larger spool)
** Note that print settings are recommended, but you can experiment with your own.
Please share your experience with this larger version. I only tested the right side on my enclosure and will report back on how well it holds up.