Flexible leash poop bag holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple poop bag holder that attaches to a dog leash, printed in a flexible filament.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple dog poop bag holder that you can loop into a leash and use to hold a bag while walking. The knot in a tied-closed bag is pushed through the cross, and the elastic tension holds it in place.
I based this on a bunch of common online designs that are <$10, but why pay anything when you can make it out of 10 cents of plastic!
Recommended Print Settings:
Unfortunately it's hard to recommend settings for flex because materials can vary a bunch -- but here's what I used for my Overture TPU 95A:
- Layer height: 0.16 mm
- Line width: 0.45 mm
- Top layers: 4
- Bottom Layers: 4
- Perimeters: 2
- I've also tried 1 and 3 and they both worked well enough!
- Infill: 20% Gyroid
- I've also tried increasing the top/bottom layers to make it fully solid, and that worked fine too!
Let me know if you have any suggestions for other materials.