Adapter for Replacing Stock Fans with Noctua in DeskPi Super6C Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter is needed to replace the stock fans in the Super6C case with Noctua fans, when reusing the stock screws.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 786
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
The stock fans in the DeskPi Super6C case are very loud. These stock fans can be replaced with 40mm Noctua low-noise fans. However, the same screws that mount the stock fans are smaller than the mounting holes on the Noctua fans. A solution is to print the adapters in this project, which allow the stock screws to be used to mount the Noctua fans. A total of 6x adapters are needed to mount 3x Noctua fans.
Note: the hole in the adapter is only slightly larger than the threads on the stock screws. A screwdriver might be required to drive the screw through the adapter.