nokia_ont_holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first upload. I printed mine with supports, but you could try without to see if you can cut down on print time.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
My first upload.
My first upload. I printed mine with supports, but you could try without to see if you can cut down on print time.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
Yes
Infill:
Gyroid
Filament:
Microcenter - Inland PLA Tough
black
Notes:
Two versions, one without rubber feet holes, and one with. The one with rubber feet holes still has a pocket on the bottom for a magnet, but my printer filled the pocket with support material.
The hot-glue in the picture is from an attempt at gluing two magnets on the bottom of the one with holes for the rubber feet.
Just something to keep working on.
Category: Other