Sunlu Filadrayer S2 alternative mount for Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is alternative mount for Filadrayer S2 to be mounted on top of Ender 3.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is alternative mount for Filadrayer S2 to be mounted on top of Ender 3.
It uses original 2 hole attachment to dryer body. This could be not enough for high speed printing but time will tell. Also position of internal fan is +- original.
Mount is meant to be coupled with part for tangencial outlet to the bottom. This part have to have drilled hole to casing, otherway stock filament path are “disastrous” (from top) and tends to affect print quality in a bad way. I use 4mm PTFE tube (from stock extruder) to guide filament in the dryer.
Building advice:
0.4mm nozzle
0.2mm layer height
3 perimeters and 4 horizontal planes
I did use gyroid 20% infill
lay model on side - like banana and add tree supports around central mount hole, rest is self supporting (at least for me) .