1 / 3
The Zen gcode (for Prusa MINI+)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collection of models and a gcode file for Prusa MINI+ printer to transform the Prusa MINI+ into a Zen gardener
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 833
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is a collection of models and a *.gcode file for Prusa MINI+ printer to transform the Prusa MINI+ into a Zen gardener.
- print the Zen garden tool (it is a 7mm bit compatible elongated tool that fits on your Prusa MINI+ nozzle)
- print the Zen garden basin and leave it attached to the steel sheet on the print bed
- Carefully fill the Zen garden basin with your sand of choice and meditation (luckily the sheet is detachable)
- “Print” with the supplied “The_Zen.gcode” and your Prusa MINI+ will transform into a little Zen gardener and create a Zen pattern garden on the surface of your supplied sand. (put the tool on the nozzle when printer waits at X 180,Y 0 for 20s)
- Watch it do its work and meditate.
(This is an experiment in Zen and 3D printing fun; please update, optimize, and expand on the GCODE and report back; no extrusion, no heating)
(The tool is 13 mm high, approximately 10 mm below the nozzle end; the garden basin walls are 14 mm high and the bottom is 2.2 mm thick).
I wish You enlightenment.