1 / 5
Secur-A-Tag: An Airtag compatible clip system for bags, pets, tools, and more.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A system of durable clips to attach Airtags to common items. Useful for tools, bags, pets, bicycles and more.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 727
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
A system of durable clips to attach Airtags to common items. Useful for tools, bags, pets, bicycles and more. When printed in PETG and other similar temp/impact resistant filaments, the clips will take way more load than you would expect, and are more or less not removable without intentionally prying the clip off with a coin or other object.
Secur-A-Tag consists of the following models:
- Tagholder: This holds the airtag itself with a moderate friction fit. The plastic side should face out through the circle so it can be most audible. Print upright with no supports. The overhang is not an issue.
- 3-4_clip: A clip for attaching TagHolder to ¾" or 18mm webbing/straps All clips should be printed on their wide, thin edge. A brim may be helpful.
- 1inch_clip: A clip for attaching TagHolder to 1" or 24mm webbing/straps
- ZipClip: A clip for attaching TagHolder to goods using two medium sized zip-ties.