Robust Finger Skateboard Toy No Glue :)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Board 1: WIth Chamfer Board 2: With radius Both without name ;_) I printed the finger Board from aaskedall because my…
- Ocena
- 4,368 / 5
- Polubienia
- 259
- Pobrania
- 2049
- Wydruki
- 30
- Wyświetlenia
- 5689
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Check out the new V2 too :)
https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files
Board 1: WIth Chamfer
Board 2: With radius
Printing Instructions:
Print the axis massive with as many perimeter as possible & 100% infill.
Use some supports on the board itself
Set the seam at random position for the axis bearing :)
I printed a finger Board from thingiverse because my son loves these boards.
But due to the contstruction the wheels borke like 10 minutes after I gave the board to my children :(
So i designed a new skateboard which is ment to last at least some weeks :D
You will not need any glue due to slim tolerances.
I cut of the seams at the axis inserts to avoid their unevenness.
Tipp: Assemble the Wheels with a vice!
Have fun printin, assembling and playinPS: If you have Problems with tight tolerances try to Print all parts but the Axis in 101% . You can divide parts and scale them Up in your slicer! But then you might have to glue the wheels to the Axis later. :D!