Sniffle Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for some Texas Instruments Launchpad boards. Tested with CC2651P3 and CC1352P.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I created this to protect the Launchpad board, used in BLE sniffer project: https://github.com/nccgroup/Sniffle
Compatibility
Case is designed to work with all sizes of the supported boards as they come from the factory. This means that for the shorter boards, this case is larger than needed. This case is also quite tall, due to the headers assembled to the board.
Case was tested with short and long variants; CC2651P3 and CC1352P
With some modifications to the board, you could make the case a lot smaller. I didn't want to have modifications as requirement to keep your board safe, so decided to make it a bit larger to fit the board as it is.
Top options
There are two designs for the top; default and hex
Only difference is the Bluetooth logo pattern.
Assembly
Assembly requires just two M3 screws. Board should stay quite well in place with just the two screws, as the lid has two contact points in the middle of the board.