Organizer Tray for spansammler's Orgnaizer Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray/fixture to organize spansammler's organizer box upright
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
spansammler's Organizer Box is a simply legendary design! I love how you can customize each box to your needs.
I wanted a way to store them upright in my Harbor Freight side box so that I would not have to pull a stack of boxes out when the one I wanted was inevitably on the bottom. So I made this tray/fixture.
It does use a fair amount of filament if you use a standard infill. I recommend printing using lightening infill at 25% so you can keep the plastic usage down. Print with 3-4 walls. Print top side down if you have a textured PEI plate so that your top visible surface has a nice textured face.
There are slots for 60mm magnets that you can get on amazon for pretty cheap if you would like to use it but don't have a HF side box.