Mini power supply with ZK-4KX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini DC power supply Based on ZK-4KX DC to DC Buck Boost Converter Input: 5-30V Output: 0,5-30V; 4A
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 254
- Wydruki
- 2
- Wyświetlenia
- 1393
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Mini DC power supply
Based on ZK-4KX DC to DC Buck Boost Converter
Input: 5-30V
Output: 0,5-30V; 4A
Necessary parts:
Its based on ZK-4KX DC DC Buck Boost Converter, that you can get for around 10€ from Aliexpress.
For the banana plugs that its designed for are those from Czech store GME.cz, but i hope that those from Aliexpress will work either.
As the connector at the back I am using this one form TME.eu, but since there is a datasheet available, you can pretty easily use another one.
In the version with the switch (which I highly recommend) is used this switch from TME.eu. The datasheet is again available, so you can use another one, or with basic cad skill, you can modify the hole. Warning: when searching for the switch pay attention to the CURRENT CONTACT RATING which should at least the same as your mains power supply
The 4 screw on the back are 4.0x10 mm wood screws. You will need four of them.
Its highly recommended to USE THICK WIRES, since there can be currents up to 4 amps.
Print settings:
There are not any special requirements for printing.
Its good to print the main part face down, and use organic supports for the screw holes.