Fisher Price Coins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Are the kids missing any coins from their Fisher Price Shop? Print these...
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 189
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Introduction
A friend of ours was missing a few coins from a Fisher Price Shop she had for her grandchildren to play with. There are coins for 5, 10 and 25 cents, but I included the STEP files, Fusion360 design files and 3mf & GCODE files, so you can adapt the currency if needed or print immediately.
Printing
You best print the coins in an upright position (on their side, I mean), with support everywhere, 0.2 mm layer height is sufficient, but you could also go for less, if you want to. I used PLA, but you can also use PETG for something a bit more sturdy. Both are rated food safe, if you use virgin material and not recycled.
The colors:
- 5 cent coin - Red
- 10 cent coin - Yellow
- 25 cent coin - Blue