Joystick Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Joystick Toy is printed in 3 parts and is a variation of standard fidget toys.
- Ocena
- 4,765 / 5
- Polubienia
- 432
- Pobrania
- 2689
- Wydruki
- 44
- Wyświetlenia
- 13 529
- Oceny
- 34
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I designed Joystick Toy in Fusion360 and prototyped it through several stages before landing on this design.
I only recommend printing this assembly in PLA or a material that maintains dimensional accuracy after printing. It prints well at 100% but I would recommend printing it at 125%. The Gcodes listed below are automatically scaled at 125%. I prefer using .15mm layer heights which seems to work well for threads and the ball-and-socket joints.
I natively design in Imperial measurements so you might have to change your scale to 2540% to get it to convert into Metric but the latest version of PrusaSlicer should notice that it is designed in Imperial.