fish tank floating plant retainer/water flow deflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mounts to 3cm filter mat (HMF). Retains floating plants and/or route the pump outlet flow
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 690
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed something that routes the stream of my pump outlet nozzle and something that prevents my floating plants to move around
This thingies mounts to filter mat 3cm thick. Thicker mat might work, but I haven't tested it
If you need other sizes, please let me know!
Print Instructions
- print in PETg or any other fish friendly material
See also my other fish tank stuff: https://www.printables.com/@Antimaterie/collections/973165
Additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.