1 / 5
Drill Organizer Metric 1.0mm to 13.0mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed to organize my drills.
- Ocena
- 4 / 5
- Polubienia
- 40
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 1220
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (87)Powiązane
I needed a organizer for my drills in metric.
All the rooms in the organizer is marked with raised numbers the hight is 1mm.
The drill organizers starts at ø1mm to ø13mm and the rooms jumps 0.5mm and
is split into 3 sections that connects with small taps.
> Print materiel used: Sunlu Black PetG / Sunlu White PetG
> Hotend print settings: First layer 330°C Other layers 225°C
> Bed print settings: 80°C
> Support: (Grid) on build plate only.
> Infill: 15% Gyroid.
> Color Change: At 33,20mm hight to white PetG