VENTILATED FUNNEL - PARAMETRIC - vase mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
vase mode version of https://www.printables.com/model/133384-better-ventilated-funnel-parametric
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 202
- Wydruki
- 2
- Wyświetlenia
- 914
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The settings in the 3mf file use 1.2 mm extrusion width on a 0.4mm nozzle, which works great on my printer, but YMMV.
The 3mf is set up for PETG, but includes 100% fan and slower minimum speed, because my first attempt with less fan and faster minimum speed tried to become a puddle as it got near the neck of the funnel.
The idea with using vase mode was to eliminate any PETG strings in the funnel neck, even using somewhat-iffy PETG.
In theory I think one could keep the handle and set enough bottom layers to print that before going into vase mode for the rest, but I only just thought of that, so just an idea for a different remix.
The modified onshape is here: