1 / 10
BirdBunker birdhouse Series - 010 - The Wasp - Insect Hotel — zdjęcie 1
1 / 10

BirdBunker birdhouse Series - 010 - The Wasp - Insect Hotel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Birdhouse/Insect hotel made from a 2.2 liter metal Gas-canister. This one is shaped like a wasp/bee

Ocena
5 / 5
Polubienia
32
Pobrania
89
Wydruki
1
Wyświetlenia
1252
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I have a steady supply of empty unrefillable gas canisters (2.2 liters) and was looking for something to do with them other than just throwing them away (they can not be refilled).

So I created a set of “Bird Bunkers” (because of the steel shell that is used for the main housing).

I painted the bottles (steel shell) in some funky colors and thought of a roof that would go well with the bottle.

This one turned into a “bed and breakfast” for the birds … or the insects (or both).

It is a very long print set, but I hope it is worth the effort. When printing the bottle as well, you can leave out one tear of the insect hotel (or the head won't fit for the wings).

Everything should print without supports.

I was still printing this one while putting it up so the photo's of the print will come later.

Edit: I was printing and found the parts to be quite heavy … So I made a bolt that would be a bit stronger. I added a holding bolt that would require a metal bolt that is long enough and no wider than a M10 (I use a M8 or a M6) and would then hold the stinger.

Later Edit: The whole thing is finished printing now and … it looks great (if I do say so myself ;-) )… photos added.

Tagi