MT-SYSTEM Handle for 20x20mm profiles (Handgriff für 20x20mm Profile)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MT-SYSTEM Handle for 20x20mm profiles (Handgriff für 20x20mm Profile)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We designed this useful handle especially for common 20x20mm aluminium construction profiles.
The handle is about 10cm long and can easily be slid onto the profile and be fixed by using a 4 or 5mm screw through the intended hole at the lower end of the handle. Just use a 4 or 5mm slot nut in the profile to counter the screw.
As you can see on the pictures it is also perfect for building your own camera mount/rig whatever...
The handle is smooth & grippy and even in PLA very stable. If you have stronger forces while usage switch to PETG please. Have fun!
Material: PLA/PETG
Layer height: 0.3mm or better for even smoother grip
Infill: min. 30%
Print in upside down direction
HOW TO PRINT?
All MT-SYSTEM components are designed to be printed out in PLA or PETG on 02mm layer height. They are very stable but some parts like holders for heavy equipment (cordless screwdrivers) should be printed in PETG with a minimum infill of 40%.
WHAT IS IT ALL ABOUT?
HERE you can find ALL MODELS of the MT-SYSTEM we have launched so far.
We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. Here on Printables we offer a lot of stuff for free so have a look and pic YOUR individual endowment. If you miss anything please let us know. We are always comitted to extend the system. Thanks.
MOUNTING THE MT-SYSTEM:
The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know.
Link1: https://makerteam.de/en/search?search=profile
Link2: https://makerteam.de/en/search?search=Linsenschraube
Link3: https://makerteam.de/en/search?search=slot+nut
Link4: https://makerteam.de/en/search?search=magnet
SPECIAL ITEMS:
The MT-SYSTEM is much more than these few parts here at Printables. If you need special equipment like battery holders for FESTOOL, MAKITA and other unique stuff please visit our webshop: https://makerteam.de/3D-Druck/3D-Produkte/MT-SYSTEM/