1 / 4
Fish/Eel Spike (Ikejime) handle and safety cover — zdjęcie 1
1 / 4

Fish/Eel Spike (Ikejime) handle and safety cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spike used for humanely killing fish. This model is very common but suffers from a lack of safety cover and grip.

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
317
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Spike used for humanely killing fish. (IkeJime or Ike Jime)
This design of spike is very common (e.g. on amazon for 10 bucks) but suffers from a lack of safety cover and grip.

The handle uses x5 10mm self-tapping M2 screws for assembly.

Most printers should be able to bridge the handle cavities fine and print without supports, but you can have a bit underneath if needed.

No supports should be needed for the safety cover.

The safety cover is printed so that it flexes a bit when sliding on to tightly grip the spike.

This is the spike I purchased, but there are MANY vendors selling this identical product:
https://www.amazon.ca/dp/B09JWPVL64

I would also advise putting a slightly sharper tip on the spike, a few passes on a diamond plate or fine sand paper would be enough.

Tagi