LeedleDynamics Corsair scope/adapter holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the Corsair barrel adapter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder for the barrel insert of the Corsair. it doubles also as a fake scope. It is mounted on the top picatinny rail via the included pin, and if you want to use the barrel extension you'll first need to mount this first, due to fact that it needs to slide on the rail. The barrel insert slides on the back of the scope and locks in just like it would in the barrel.
Printing Instructions
The scope needs to be printed upright with the “sight” on the printbed and a brim is strongly advised. The pin is printed ,just like the pins of the Corsair, with its flat side on the printbed.