Drilling Depth Stops (Imperial) Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is Imperial version of drilling depth stops I created some time ago
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 127
- Wydruki
- 2
- Wyświetlenia
- 486
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Following a suggestion from a maker that needed drilling depth stops for Imperial drilling bits, I reused the the Drilling depth stop (Metric) model I created and adapted my design to the main sizes used: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
If you want other sizes, you can modify the Fusion 360 model by editing parameters
Don't forget to change also the size on the depth stop surface by editing the last sketch of the model
Printed in Prusament PETG (For "elasticity) Orange with 0.2mm layer height and 3 perimeters
You'll need M4x12 or M4x16 screw and M4 nut to tighten the drill bit.
On top of .stl and .3mf files I uploaded Fusion 360 .f3d one so you can modify the design and adapt it to your needs
If you're looking for Metric sizes depth stops here it is → https://www.printables.com/model/126585-drilling-depth-stop-metric
Enjoy
If you like this model, take a look also at my other designs