1 / 8
GoPro Camera Extender 220mm between holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to make it even longer, but printable on Prusa Mini+
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About:
Remix of 3 GoPro Extensions Strong Ends by tmorris9.
- took the longest one and then extended it
- length between screw holes is 220mm
- printable on Prusa Mini+ diagonally
- total size something under 234mm
Please give a like and post makes and provide comments for further improvements.
Print:
- 100% infill
- you may need to rotate it upside down so it lays flat without supports (limitations of original model, forgot to fix it)
- no supports needed
- to print it on Prusa Mini+ you will probably have to disable supports, brim, skirt and rotate it 45 degrees to place it diagonally
Other:
- On the bottom there is Extended GoPro mount on Gridfinity.
- on the top generic gopro mount (2 slots) glued to Multisensor ESP32-WROOM-32 NodeMCU with Camera hole and extended builtin antenna
- assembled with 2x M5 nut, bolt, washers
- gcode contains extra moves to trigger botton on z-axis to trigger photos for timelapse.