Scraperite plastic razor handle / scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong holder for the orange plastic razor blades
- Ocena
- 4,905 / 5
- Polubienia
- 142
- Pobrania
- 1520
- Wydruki
- 24
- Wyświetlenia
- 4673
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Update: 28-04-'24: Tighter version of the blade holder added.
Remix of the Scraperite handle by Genghis.
I like Genghis' design, nicely done with the curved shape and knurling; but the part for holding the blade didn't work very well for me, seems the end is upside down?
I only made some changes to the end to hold the blade secure. The result is very sturdy, you can put a lot of pressure on the blade.
I sometimes work as a decorater/painter, it is strong enough to hold up to rough work: scraping of gunk etc. from delicate surfaces.
Printing
I printed with 0.6mm nozzle and 0.3mm layer height in ASA.
2 perimeters and 3 bottom layers, 4 top layers and 15% infill makes it very strong.
The overhang needs support; when cleaning out the support take care not to cut off the small cam(?) that locks the blade in place.
There is also a version of the model with a tighter fit of the razor blade: better fit, but it needs careful cleaning out of the supports.
The print in the last photo looks a bit rough, I didn't have the best parameters for ironing at the time.
(By the way, the original Scraperite tools and blades are not expensive. The China copies sometimes cost more 🙂)
Bart
🥳 18-1-'26 Thank you all for 1000 downloads!