Luffy Gear 5 - One Piece 2D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2D design of Luffy Gear 5, from the One Piece Anime, to hang on your wall.
- Ocena
- 5 / 5
- Polubienia
- 277
- Pobrania
- 2283
- Wydruki
- 6
- Wyświetlenia
- 6396
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Hello!, this time I bring you the model for wall decoration to
"Luffy Gear 5" or "Luffy Fifth Gear" in 20 cm 2D.
You can print it in one piece or print it in 2 parts if it doesn't reach your printer (like my c':). You can also scale it.
Below I leave you the parameters with which I printed it but you can use yours and tell me how it went.
Enjoy printing.
Parameters
- Layer Height and Initial Layer: 0.2 mm
- Horizontal Expansion: 0.12
-Infill: 15%
- Fill Pattern: Lines
-Bed temperature: 55 °C
-Print speed: 50 mm/s (attached an image with the speeds in more detail in the carousel) It is important that in the initial layers they are of low speeds to achieve good adhesion.
-Support: No