Pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holes are 1" on center, and holes are 1/4" diameter. Simple design with built in standoffs, for #6 screws
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 457
- Wydruki
- 3
- Wyświetlenia
- 3499
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Basic Pegboard NOT Metric. Sized for common 1" pegboard hooks.
8" Square, fits on most printers.
Great way to get organized and use up your scraps of filament.
I recommend printing with a brim, and keeping the number of bottom layers low. 4-5 so that it won't warp as easily. I printed it at 0.2mm but there's no need for thinner layers. Since it's all vertical geometry, you can go as thick as you want.
Use #6 Flathead screws, 1" or longer for mounting, depending on what your attaching to.