1 / 3
64 slot Gearhart CSM cylinder — zdjęcie 1
1 / 3

64 slot Gearhart CSM cylinder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Customized version of https://www.thingiverse.com/thing:3553275 Created with Customizer!…

Ocena
0 / 5
Polubienia
14
Pobrania
63
Wydruki
0
Wyświetlenia
538
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Customized version of https://www.thingiverse.com/thing:3553275

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3553275

Printed in PLA Pro on Ender 3 Pro

No brim, support on build plate only (so only under the cylinder brim at the bottom)

My slots and cylinder spring channel came out very clean - I just ran an emery board down each slot for insurance. Probably didn't even need that.

Changed the cylinder diameter value from 123 to 122.5 for a better fit in the cam shell. 

 

Instructions

Using the following options:

cylinder_slots = 64

slot_width = 1.5

ribber_slots = 60

cylinder_diameter = 122.5

cylinder_height = 83

wall_thickness = 3

tooth_thickness = 5

normTooth_width_at_top = 2.2

spring_slot_width = 3.1

hook_drop_depth = 14

spring_slot_height = 20

Category: Parts

Tagi